ShowMessageIfDebugFlagActive Procedure
Codeunit Debug Single Instance
Shows a blocking message to the user if the Debug Flag is active.
The user can choose to stop the running function by selecting cancel in the shown confirm message.
Overloads
ShowMessageIfDebugFlagActive(Text[100]; Codeunit "QWETB Temp Blob"; Boolean) Procedure
Shows a blocking message to the user if the Debug Flag is active.
The user can choose to stop the running function by selecting cancel in the shown confirm message.
Signature
[NonDebuggable]
ShowMessageIfDebugFlagActive(DebugFlag: Text[100]; TempBlob: Codeunit "QWETB Temp Blob"; ReplaceNewLineCharacter: Boolean)
Parameters
DebugFlag Text[100]
The name of the Debug Flag that needs to be active to show the message.
TempBlob Codeunit "QWETB Temp Blob"
The message to show, in the form of a blob. The message is limited to 10000000 characters, messages with more than 10000000 characters will be cut.
ReplaceNewLineCharacter Boolean
The "new line character" (\) will be replaced with new line if set to true, otherwise \ will be printed as-is.
ShowMessageIfDebugFlagActive(Text[100]; Codeunit "QWETB Temp Blob"; Boolean; Boolean) Procedure
Shows a blocking message to the user if the Debug Flag is active.
The user can choose to stop the running function by selecting cancel in the shown confirm message.
Signature
[NonDebuggable]
ShowMessageIfDebugFlagActive(DebugFlag: Text[100]; TempBlob: Codeunit "QWETB Temp Blob"; ReplaceNewLineCharacter: Boolean; Forced: Boolean)
Parameters
DebugFlag Text[100]
The name of the Debug Flag that needs to be active to show the message.
TempBlob Codeunit "QWETB Temp Blob"
The message to show, in the form of a blob. The message is limited to 10000000 characters, messages with more than 10000000 characters will be cut.
ReplaceNewLineCharacter Boolean
The "new line character" (\) will be replaced with new line if set to true, otherwise \ will be printed as-is.
Forced Boolean
If true, the message will always be shown, even if the "Debug Flag" specified in DebugFlag is inactive.
ShowMessageIfDebugFlagActive(Text[100]; Text) Procedure
Shows a blocking message to the user if the Debug Flag is active.
The user can choose to stop the running function by selecting cancel in the shown confirm message.
Signature
[NonDebuggable]
ShowMessageIfDebugFlagActive(DebugFlag: Text[100]; DebugMessage: Text)
Parameters
DebugFlag Text[100]
The name of the Debug Flag that needs to be active to show the message.
DebugMessage Text
The message to show.
ShowMessageIfDebugFlagActive(Text[100]; Text; Boolean) Procedure
Shows a blocking message to the user if the Debug Flag is active.
The user can choose to stop the running function by selecting cancel in the shown confirm message.
Signature
[NonDebuggable]
ShowMessageIfDebugFlagActive(DebugFlag: Text[100]; DebugMessage: Text; ReplaceNewLineCharacter: Boolean)
Parameters
DebugFlag Text[100]
The name of the Debug Flag that needs to be active to show the message.
DebugMessage Text
The message to show.
ReplaceNewLineCharacter Boolean
The "new line character" (\) will be replaced with new line if set to true, otherwise \ will be printed as-is.
ShowMessageIfDebugFlagActive(Text[100]; Text; Boolean; Boolean) Procedure
Shows a blocking message to the user if the Debug Flag is active.
The user can choose to stop the running function by selecting cancel in the shown confirm message.
Signature
[NonDebuggable]
ShowMessageIfDebugFlagActive(DebugFlag: Text[100]; DebugMessage: Text; ReplaceNewLineCharacter: Boolean; Forced: Boolean)
Parameters
DebugFlag Text[100]
The name of the Debug Flag that needs to be active to show the message.
DebugMessage Text
The message to show.
ReplaceNewLineCharacter Boolean
The "new line character" (\) will be replaced with new line if set to true, otherwise \ will be printed as-is.
Forced Boolean
If true, the message will always be shown, even if the "Debug Flag" specified in DebugFlag is inactive.
ShowMessageIfDebugFlagActive(Text[100]; Text; Boolean; Variant) Procedure
Shows a blocking message to the user if the Debug Flag is active.
The user can choose to stop the running function by selecting cancel in the shown confirm message.
Signature
[NonDebuggable]
ShowMessageIfDebugFlagActive(DebugFlag: Text[100]; DebugMessage: Text; ReplaceNewLineCharacter: Boolean; Parameter1: Variant)
Parameters
DebugFlag Text[100]
The name of the Debug Flag that needs to be active to show the message.
DebugMessage Text
The message pattern to show. Placeholder %1 is substituted with Parameter1.
ReplaceNewLineCharacter Boolean
The "new line character" (\) will be replaced with new line if set to true, otherwise \ will be printed as-is.
Parameter1 Variant
Value that substitutes %1 in DebugMessage.
ShowMessageIfDebugFlagActive(Text[100]; Text; Boolean; Variant; Variant) Procedure
Shows a blocking message to the user if the Debug Flag is active.
The user can choose to stop the running function by selecting cancel in the shown confirm message.
Signature
[NonDebuggable]
ShowMessageIfDebugFlagActive(DebugFlag: Text[100]; DebugMessage: Text; ReplaceNewLineCharacter: Boolean; Parameter1: Variant; Parameter2: Variant)
Parameters
DebugFlag Text[100]
The name of the Debug Flag that needs to be active to show the message.
DebugMessage Text
The message pattern to show. Placeholders (%1 .. %2) are substituted with the supplied parameters.
ReplaceNewLineCharacter Boolean
The "new line character" (\) will be replaced with new line if set to true, otherwise \ will be printed as-is.
Parameter1 Variant
Value that substitutes %1 in DebugMessage.
Parameter2 Variant
Value that substitutes %2 in DebugMessage.
ShowMessageIfDebugFlagActive(Text[100]; Text; Boolean; Variant; Variant; Variant) Procedure
Shows a blocking message to the user if the Debug Flag is active.
The user can choose to stop the running function by selecting cancel in the shown confirm message.
Signature
[NonDebuggable]
ShowMessageIfDebugFlagActive(DebugFlag: Text[100]; DebugMessage: Text; ReplaceNewLineCharacter: Boolean; Parameter1: Variant; Parameter2: Variant; Parameter3: Variant)
Parameters
DebugFlag Text[100]
The name of the Debug Flag that needs to be active to show the message.
DebugMessage Text
The message pattern to show. Placeholders (%1 .. %3) are substituted with the supplied parameters.
ReplaceNewLineCharacter Boolean
The "new line character" (\) will be replaced with new line if set to true, otherwise \ will be printed as-is.
Parameter1 Variant
Value that substitutes %1 in DebugMessage.
Parameter2 Variant
Value that substitutes %2 in DebugMessage.
Parameter3 Variant
Value that substitutes %3 in DebugMessage.
ShowMessageIfDebugFlagActive(Text[100]; Text; Boolean; Variant; Variant; Variant; Variant) Procedure
Shows a blocking message to the user if the Debug Flag is active.
The user can choose to stop the running function by selecting cancel in the shown confirm message.
Signature
[NonDebuggable]
ShowMessageIfDebugFlagActive(DebugFlag: Text[100]; DebugMessage: Text; ReplaceNewLineCharacter: Boolean; Parameter1: Variant; Parameter2: Variant; Parameter3: Variant; Parameter4: Variant)
Parameters
DebugFlag Text[100]
The name of the Debug Flag that needs to be active to show the message.
DebugMessage Text
The message pattern to show. Placeholders (%1 .. %4) are substituted with the supplied parameters.
ReplaceNewLineCharacter Boolean
The "new line character" (\) will be replaced with new line if set to true, otherwise \ will be printed as-is.
Parameter1 Variant
Value that substitutes %1 in DebugMessage.
Parameter2 Variant
Value that substitutes %2 in DebugMessage.
Parameter3 Variant
Value that substitutes %3 in DebugMessage.
Parameter4 Variant
Value that substitutes %4 in DebugMessage.
ShowMessageIfDebugFlagActive(Text[100]; Text; Codeunit "QWETB Temp Blob"; Boolean; Boolean) Procedure
Shows a blocking message to the user if the Debug Flag is active.
The user can choose to stop the running function by selecting cancel in the shown confirm message.
Signature
[NonDebuggable]
ShowMessageIfDebugFlagActive(DebugFlag: Text[100]; DebugHeader: Text; TempBlob: Codeunit "QWETB Temp Blob"; ReplaceNewLineCharacter: Boolean; Forced: Boolean)
Parameters
DebugFlag Text[100]
The name of the Debug Flag that needs to be active to show the message.
DebugHeader Text
A header for the message, used instead of the name of the Debug Flag.
TempBlob Codeunit "QWETB Temp Blob"
The message to show, in the form of a blob. The message is limited to 10000000 characters, messages with more than 10000000 characters will be cut.
ReplaceNewLineCharacter Boolean
The "new line character" (\) will be replaced with new line if set to true, otherwise \ will be printed as-is.
Forced Boolean
If true, the message will always be shown, even if the "Debug Flag" specified in DebugFlag is inactive.
ShowMessageIfDebugFlagActive(Text[100]; Text; Text; Boolean; Boolean) Procedure
Shows a blocking message to the user if the Debug Flag is active.
The user can choose to stop the running function by selecting cancel in the shown confirm message.
Signature
[NonDebuggable]
ShowMessageIfDebugFlagActive(DebugFlag: Text[100]; DebugHeader: Text; DebugMessage: Text; ReplaceNewLineCharacter: Boolean; Forced: Boolean)
Parameters
DebugFlag Text[100]
The name of the Debug Flag that needs to be active to show the message.
DebugHeader Text
A header for the message, used instead of the name of the Debug Flag.
DebugMessage Text
The message to show.
ReplaceNewLineCharacter Boolean
The "new line character" (\) will be replaced with new line if set to true, otherwise \ will be printed as-is.
Forced Boolean
If true, the message will always be shown, even if the "Debug Flag" specified in DebugFlag is inactive.
ShowMessageIfDebugFlagActive(Text[100]; Text; Variant) Procedure
Shows a blocking message to the user if the Debug Flag is active.
The user can choose to stop the running function by selecting cancel in the shown confirm message.
Signature
[NonDebuggable]
ShowMessageIfDebugFlagActive(DebugFlag: Text[100]; DebugMessage: Text; Parameter1: Variant)
Parameters
DebugFlag Text[100]
The name of the Debug Flag that needs to be active to show the message.
DebugMessage Text
The message pattern to show. Placeholder %1 is substituted with Parameter1.
Parameter1 Variant
Value that substitutes %1 in DebugMessage.
ShowMessageIfDebugFlagActive(Text[100]; Text; Variant; Variant) Procedure
Shows a blocking message to the user if the Debug Flag is active.
The user can choose to stop the running function by selecting cancel in the shown confirm message.
Signature
[NonDebuggable]
ShowMessageIfDebugFlagActive(DebugFlag: Text[100]; DebugMessage: Text; Parameter1: Variant; Parameter2: Variant)
Parameters
DebugFlag Text[100]
The name of the Debug Flag that needs to be active to show the message.
DebugMessage Text
The message pattern to show. Placeholders (%1 .. %2) are substituted with the supplied parameters.
Parameter1 Variant
Value that substitutes %1 in DebugMessage.
Parameter2 Variant
Value that substitutes %2 in DebugMessage.
ShowMessageIfDebugFlagActive(Text[100]; Text; Variant; Variant; Variant) Procedure
Shows a blocking message to the user if the Debug Flag is active.
The user can choose to stop the running function by selecting cancel in the shown confirm message.
Signature
[NonDebuggable]
ShowMessageIfDebugFlagActive(DebugFlag: Text[100]; DebugMessage: Text; Parameter1: Variant; Parameter2: Variant; Parameter3: Variant)
Parameters
DebugFlag Text[100]
The name of the Debug Flag that needs to be active to show the message.
DebugMessage Text
The message pattern to show. Placeholders (%1 .. %3) are substituted with the supplied parameters.
Parameter1 Variant
Value that substitutes %1 in DebugMessage.
Parameter2 Variant
Value that substitutes %2 in DebugMessage.
Parameter3 Variant
Value that substitutes %3 in DebugMessage.
ShowMessageIfDebugFlagActive(Text[100]; Text; Variant; Variant; Variant; Variant) Procedure
Shows a blocking message to the user if the Debug Flag is active.
The user can choose to stop the running function by selecting cancel in the shown confirm message.
Signature
[NonDebuggable]
ShowMessageIfDebugFlagActive(DebugFlag: Text[100]; DebugMessage: Text; Parameter1: Variant; Parameter2: Variant; Parameter3: Variant; Parameter4: Variant)
Parameters
DebugFlag Text[100]
The name of the Debug Flag that needs to be active to show the message.
DebugMessage Text
The message pattern to show. Placeholders (%1 .. %4) are substituted with the supplied parameters.
Parameter1 Variant
Value that substitutes %1 in DebugMessage.
Parameter2 Variant
Value that substitutes %2 in DebugMessage.
Parameter3 Variant
Value that substitutes %3 in DebugMessage.
Parameter4 Variant
Value that substitutes %4 in DebugMessage.
ShowMessageIfDebugFlagActive(Text[100]; Record "QWETB tTempBlob" temporary; Boolean) Procedure
Shows a blocking message to the user if the Debug Flag is active.
The user can choose to stop the running function by selecting cancel in the shown confirm message.
Deprecated
This procedure is deprecated and should not be used.
Reason: Use the overload that takes Codeunit "QWETB Temp Blob" instead. It offers better performance.
Deprecated since: 27.0
Signature
[Obsolete('Use the overload that takes Codeunit "QWETB Temp Blob" instead. It offers better performance.', '27.0')]
[NonDebuggable]
ShowMessageIfDebugFlagActive(DebugFlag: Text[100]; var tTempBlob: Record "QWETB tTempBlob" temporary; ReplaceNewLineCharacter: Boolean)
Parameters
DebugFlag Text[100]
The name of the Debug Flag that needs to be active to show the message.
var tTempBlob Record "QWETB tTempBlob" temporary
The message to show, in the form of a blob. The message is limited to 10000000 characters, messages with more than 10000000 characters will be cut.
ReplaceNewLineCharacter Boolean
The "new line character" (\) will be replaced with new line if set to true, otherwise \ will be printed as-is.
ShowMessageIfDebugFlagActive(Text[100]; Record "QWETB tTempBlob" temporary; Boolean; Boolean) Procedure
Shows a blocking message to the user if the Debug Flag is active.
The user can choose to stop the running function by selecting cancel in the shown confirm message.
Deprecated
This procedure is deprecated and should not be used.
Reason: Use the overload that takes Codeunit "QWETB Temp Blob" instead. It offers better performance.
Deprecated since: 27.0
Signature
[Obsolete('Use the overload that takes Codeunit "QWETB Temp Blob" instead. It offers better performance.', '27.0')]
[NonDebuggable]
ShowMessageIfDebugFlagActive(DebugFlag: Text[100]; var tTempBlob: Record "QWETB tTempBlob" temporary; ReplaceNewLineCharacter: Boolean; Forced: Boolean)
Parameters
DebugFlag Text[100]
The name of the Debug Flag that needs to be active to show the message.
var tTempBlob Record "QWETB tTempBlob" temporary
The message to show, in the form of a blob. The message is limited to 10000000 characters, messages with more than 10000000 characters will be cut.
ReplaceNewLineCharacter Boolean
The "new line character" (\) will be replaced with new line if set to true, otherwise \ will be printed as-is.
Forced Boolean
If true, the message will always be shown, even if the "Debug Flag" specified in DebugFlag is inactive.
ShowMessageIfDebugFlagActive(Text[100]; Text; Record "QWETB tTempBlob" temporary; Boolean; Boolean) Procedure
Shows a blocking message to the user if the Debug Flag is active.
The user can choose to stop the running function by selecting cancel in the shown confirm message.
Deprecated
This procedure is deprecated and should not be used.
Reason: Use the overload that takes Codeunit "QWETB Temp Blob" instead. It offers better performance.
Deprecated since: 27.0
Signature
[Obsolete('Use the overload that takes Codeunit "QWETB Temp Blob" instead. It offers better performance.', '27.0')]
[NonDebuggable]
ShowMessageIfDebugFlagActive(DebugFlag: Text[100]; DebugHeader: Text; var tTempBlob: Record "QWETB tTempBlob" temporary; ReplaceNewLineCharacter: Boolean; Forced: Boolean)
Parameters
DebugFlag Text[100]
The name of the Debug Flag that needs to be active to show the message.
DebugHeader Text
A header for the message, used instead of the name of the Debug Flag.
var tTempBlob Record "QWETB tTempBlob" temporary
The message to show, in the form of a blob. The message is limited to 10000000 characters, messages with more than 10000000 characters will be cut.
ReplaceNewLineCharacter Boolean
The "new line character" (\) will be replaced with new line if set to true, otherwise \ will be printed as-is.
Forced Boolean
If true, the message will always be shown, even if the "Debug Flag" specified in DebugFlag is inactive.
This documentation is generated from Smart Toolbox v27.1